BackBack

TestPro CV100-K50

$7,734.00

TestPro Copper Cable Certification kit, upgradable to multi-gig Ethernet SNR and PoE test. The kit contains: TestPro CV100 handheld tester local unit TestPro CV100 remote unit OP-CAT6A software license (CAT6A certification testing option. Enables cable...

SKU: TestPro CV100-K50Categories: Copper, Copper Testing & Certification
Description
[ Lead Time May Be Up To 3 to 4 Business Days | Contact Us For More Info ]

TestPro Copper Cable Certification kit, upgradable to multi-gig Ethernet SNR and PoE test.

The kit contains:

  • TestPro CV100 handheld tester local unit
  • TestPro CV100 remote unit
  • OP-CAT6A software license (CAT6A certification testing option. Enables cable certification testing up to and including CAT6A on a TestPro CV100 mainframe.)
  • A pair of AD-CAT6A-CH channel adapters (CAT6A channel adapter. CAT5e/6/6A channel certification when attached to TestPro CV100 with TP-OP-CAT6A option enabled.) 
  • A pair of AD-CAT6A-PL permanent link adapters (CAT6A permanent link adapter. CAT5e/6/6A permanent link certification when attached to TestPro CV100 with TP-OP-CAT6A option enabled.)
  • Carry case
  • A pair of AC power adapters
  • A pair of hanging straps
  • Quick starter guide
  • Calibration certificate

TestPro 100 Platform Specifications

Size

  • 200mm x 105mm x 50mm

Display

  • 5" TFT colour touch screen, resolution 800x400 pixels

Battery

  • Lithium ion
  • 3.7v
  • 13,200mAh

Power Adapter

  • 5V, 3A (Supplied)
  • 5 - 12V (Supported)
  • 2.1mm DC jack

Operating System

  • Linux

CPU

  • 1GHz ARM cortex-A8

USB Type A

  • USB flash drive storage

MicroUSB

  • For connecting to PC

RJ-45

  • 10/100/1G test port, network connectivity port

Bluetooth

Adapter Interface

  • 60-pin high-frequency connector rated for 5000 insertion cycles 
  • Hot-swappable

Built-in Measurement Capabilities

  • Wiremap, DC resistance and resistance unbalance, network tests
  • Tone generator (730Hz and 1440Hz)
  • All possible wire connection situations identified, as long as two wires are connected end-to-end on any pins
  • DC resistance measurement range: 0 to 50 ohm
  • Resistance (including resistance unbalance): meets TIA 1152A specs

Internal Storage

  • 4GB

Test Data Management

  • Test data pro PC software for report generation

TestPro CV100 Certifier Platform Specifications

Built-in Measurement Capabilities

MMVNA Measurement Engine

  • 9-channel dual-ended mixed-mode RF and DC measurement engine
  • Industry's highest performance patent-pending measurement architecture for data cable testing

Frequency range

  • 0.1 - 3,000 MHz
  • Wide 30,000 X frequency range

Frequency resolution

  • 0.125 MHz
  • Supports all frequency ranges required by TIA 1152A, ISO/IEC 61935-1 and beyond

Measurement time

  • CAT6A auto-test (including TCL and resistance unbalance tests): 6 sec
  • CAT8 Class II auto-test: 30 sec

Dual-ended RF measurements

  • IL, RL, NEXT, ACR-F, TCL
  • All mandatory and optional RF measurements as per standards
  • Single-pair link testing option with supported length for dual ended testing greater than 1000m

Length (propagation delay) measurement

  • Dual ended test: 0 - 600m with 0.1m resolution (0 - 6,000 nsec with 1 nsec resolution)

Supportable devices under test

  • 4-pair ethernet cables
  • 1-pair ethernet cables
  • Optical cables (SM/MM single pair MPO)

TDR-RL

  • 0 - 100m (resolution: 1m)
  • Distance-to-fault

TDR-NEXT

  • 0 - 100m (resolution: 1m)